Download Asus Flash Tool Latest 2023 (All Versions)

0/5 Votes: 0
Report this app


Asus Zenfone Flash Tool is a Windows utility that allows you to flash stock firmware on Asus Zenfone Devices. The latest version of Asus Zenfone Flash Tool has been released recently and now it can be downloaded from the direct download links below.

Download Asus Flash Tool
Asus Zenfone Flash Tool

Asus Flash Tool Supported Windows OS

  • Windows XP 32 Bit & 64 Bit
  • Windows Vista 32 Bit & 64 Bit
  • Windows 7 32 Bit & 64 Bit
  • Windows 8 32 Bit & 64 Bit
  • Windows 10 32 Bit & 64 Bit

Download Asus Flash Tool (All Versions)

FileDownload Link
Asus_Zenfone_Flash_Tool_2.0.1Download v2.0.1 ZIP

How To Install Asus Zenfone Flash Tool on Windows PC?

The installation procedure of this tool is very simple. Just download the Asus Flash Tool setup from the download button above and follow me in the below simple steps.

  1. First of all, download the latest USB drivers of Asus Zenfone and install them on your computer.
  2. Secondly, download and extract the Asus Zenfone Flash Tool latest setup from the above download button.
  3. After extracting, open the Asus Zenfone Flash Tool folder and double click on the. EXE file to start the installation.
  4. Now follow the options that appear on your computer screen.
  5. Enjoy…

Also Check: Android Flash Tool

How to Use Asus Zenfone Flash Tool to Flash Firmware?

  1. Boot your smartphone into Developer Mode and enable USB Debugging Mode from settings.
  2. Now download the correct stock ROM for your smartphone.
  3. Now make a backup of your all-important data.
  4. Now launch Asus Zenfone Flash Tool and connect your device VIA USB cable.
  5. Click on the browse button and locate the firmware location.
  6. This process will restart your device automatically. You will need to switch your device into recovery mode by pressing and holding the volume download and up key.
  7. In the Recovery mode, go to update ADB with “apply update from ADB” and start from where the flashing is paused.
  8. At the end of all processing, restart the device and then disconnect from the PC.